Detailed Product Description

Pressurized solar water heater features:

1) It provides mains pressure pre-heating via a high efficiency copper coil heat exchanger located within the solar tank.The way in which the mains pressure solar collector heats water is the same as the Non-pressurized solar collector.  Rather than using the water in the tank directly,as the Non-pressurized does, the type uses a 45~60m copper coil heat exchanger inside the tank which provides more than 1.5m of heat exchange areas.When wate flows though the coil it absorbs heat from the water  inside the solar collector tank. the solar collector tank is therefore a thermal store.

2) They are high effective and energy saving,cheap cost. safety,reliability, without danger.    Advanced control and intellgent run.

3) HS Code: 84199000

Specifications:

• Vacuum tubes: (1) Three-target tube with 30% higher performance.  (2) copper heat pipe with proplyne glycol/water, which can increase the heating efficiency rappdily 
• Vacuum tightness: P≤5.0×10-3(Pa)
• Average heat loss coefficient: ULT=0.4~0.6W(m2.ºC)
• Inner tank material: SUS304 food grade, thickness 1.2mm
• Out tank material: imported aluminium galvanized sheet
• Insulation: 55mm polyurethane total forming with pressure and best density 40kgs/ m³
• Frame material: galvanized aluminum sheet mould forming with power painting, strengthened tail support

PACKAGING:

1. standard carton packaing for one container

2. speical packaing for samples orders